Moisturizes and seals bare wood and is often used on garden furniture. Apply as you would Danish Oil to produce a soft sheen. Teak Oil Enhances the natural beauty of wood. Exterior & interior use.

There are many copies of Teak Oil, and many alternative oil-based finishes including the traditional linseed and Tung oil based products. However, most of these products are wet oils they never harden completely. This can leave them prone to collecting dirt. Briwax Teak Oil is hardening oil. Once dry, it is durable and waterproof.

Key Features:

Made in England.
Suitable for exterior use.
Weight: 16 Fl. Oz. / 500 ML
Seals, feed, and finish all varieties of wood/veneered surfaces.
Produces satin finish that enhances the natural beauty of wood.

Directions:

To achieve a good finish, ensure that the wood is dry and free from contaminants such as grease and wax. Lightly sand, apply Teak Oil liberally with a clean dry rag or brush. On new wood, 2 or 3 coats will be necessary. The more coats you use, the better the final gloss will be.

Allow 4 to 8 hours drying time between coats depending on temperature and conditions. Teak Oil can be used as a stand-alone finish or be over coated with Briwax. Use mineral spirits to clean brushes.

Warning: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Briwax Teak Oil - Seals, Feeds, Finishes (16 Fl. Oz. / 500 ML)