Write Review
$19.99
Free Shipping (USA)
Brand:
Availability: Out Of Stock

Enter your email and we will inform you when the goods appear in stock

TF-1 White - Brightest White Available

Tile-A-Fix offers a simple, affordable way to Wall & Floor Tiles. Tile-A-Fix is unparalleled when matching the color, hardness, and gloss of the original enameled finish. It is the only “fix” on the market that is good underwater.

It is also simple to use: Apply, let dry, and buff. If you already know the manufacturer’s color name, it’s easy to select the color you need from the more than 800 available choices. If you are not sure, we’ll help you find the one that’s right for you with answers to a few simple questions or a color sample that can be sent in.

IEach package contains 1/2 ounce (15cc) of touch-up material, a brush-top applicator, and finishing paper.

Brand Fixture Fix
SKU TILEFIX-TF56
Weight 0.25 lb
Product Type Repair Glaze
Collections Fixture Fix Glaze Home Improvement Paint Related Tile•A•Fix Tools
Tags

Preparation

Ensure that the damaged area and surrounding surface are clean and dry - free of dust, dirt, grease, soap residue, wax and cleaners.

Though not necessary, for a stronger bond you can carefully rough up the damaged area with the enclosed finishing paper (220 grit aluminum oxide sandpaper). The small cut of 1" x 3" allows more selective sanding of small repair areas.

For deep chips and gouges, you should first fill them with Fill•A•Fix before using Porc-A-Fix.

Repair

Shake the bottle for at least 30 seconds and allow it to sit for at least one minute prior to opening the cap. This will allow excess material on the cap or brush to roll back into the bottle. Open the cap carefully, making sure to wipe off any excess material on the lip of the bottle with a cloth.

Apply in thin layers, allowing at least one hour drying time between coats. The drying time can be decreased to several minutes by using a hand held hair dryer on the coolest setting, held at least one foot away from the repair. Use a back and forth fanning motion with the hair dryer - do not hold it stationary over one area.

Dry for 24 hours after the last layer is applied. If any brush marks remain, or if any debris has settled into the repair, sand very lightly after drying to remove these imperfections. You may use the enclosed 220-grit finishing paper, or use additional paper of similar or finer grit as you deem fit.

Finish. You may first fine-finish the repaired area with 360-600 grit silicon carbide sandpaper to save buffing time. If you do, sand just until the glaze is smooth with the surrounding porcelain, gently to avoid sanding through the glaze. Note: for many minor repairs, sanding after the final coat may not be necessary.

Then buff the repair and surrounding area with a soft cloth and a bit of automotive polishing compound.

Post-Operative Care

For routine cleaning of the repaired area, use a mild liquid abrasive or dishwashing liquid; we recommend this not only for the repaired area, but for the entire fixture. Do not use harsh chemicals or abrasive cleaners on the repaired area. This will reduce the chance of scratches from surface dirt or abrasion.