Write Review
$15.64
Brand:
Availability: 19 In Stock

Please complete this form or give us a call at +1 (732) 294-7798.

Requests submitted on weekends or holidays are processed on the next business day.

Hide Form

This is a set of replacement Plastic Toilet Bolt Caps (not OEM). They are made to match the color Jamaican Beige. Bolt Caps shipped may be flat or dome topped as supplied by manufacturer.

Two Plastic toilet bolt caps with snap on inserts for Gerber Jamaican Beige. Replace broken or missing toilet bolt caps and quickly upgrade your bathroom look.

Item Specifics:

  • Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging
  • Shape: Round / Dome
  • Style: Vintage/Retro
  • Item Height: 7/8 in
  • Item Width: 1-7/16 in
  • Material: Plastic
  • Type: Bolt Caps
  • Color: Jamaican Beige
  • Country/Region of Manufacture: United States
  • Room: Bathroom
  • Product Type: Bathroom Accessories
  • Bathroom Accessory Type: Toilet Bolt Caps
  • Brand: To Match Gerber

If you are unsure that this is the correct color for you, please contact us for assistance. This item is not returnable, so determining the correct color prior to ordering is compulsory.

These bolt caps are a special order item. Once purchased, we place the order with the manufacturer and send them the shipping label. At that point they produce them.

Due to this fact, the lead time to get them is a little longer. Please take this into consideration when ordering. Please note that tracking may be available for a period of time before item actually ships.

These bolt caps can be made in almost any color that a toilet was produced in from 1929 through the present day. Please contact us to set up a listing in your preferred color.

  • Designed to conceal floor bolts on toilets.
  • Replace broken or missing toilet bolt caps.
  • Jamaican Beige matches your Gerber toilet.
  • Made from Plastic with snap on inserts.
  • Number in Package: 2 pc.

DISCLAIMER: Colors on a website or printed from a website can vary drastically from the actual color of the fixture due to monitor and printer settings. The images on this page are for approximate visual use and should not be used to match colors exactly to your fixture. Contact us for help if you are not sure of the color of your fixture before purchase.

Prop 75 warning: This product can expose you to chemicals including styrene which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Please contact us, if you want to get ceramic toilet bolt caps instead of plastic.

Preparation

Ensure that the damaged area and surrounding surface are clean and dry - free of dust, dirt, grease, soap residue, wax and cleaners.

Though not necessary, for a stronger bond you can carefully rough up the damaged area with the enclosed finishing paper (220 grit aluminum oxide sandpaper). The small cut of 1" x 3" allows more selective sanding of small repair areas.

For deep chips and gouges, you should first fill them with Fill•A•Fix before using Porc-A-Fix.

Repair

Shake the bottle for at least 30 seconds and allow it to sit for at least one minute prior to opening the cap. This will allow excess material on the cap or brush to roll back into the bottle. Open the cap carefully, making sure to wipe off any excess material on the lip of the bottle with a cloth.

Apply in thin layers, allowing at least one hour drying time between coats. The drying time can be decreased to several minutes by using a hand held hair dryer on the coolest setting, held at least one foot away from the repair. Use a back and forth fanning motion with the hair dryer - do not hold it stationary over one area.

Dry for 24 hours after the last layer is applied. If any brush marks remain, or if any debris has settled into the repair, sand very lightly after drying to remove these imperfections. You may use the enclosed 220-grit finishing paper, or use additional paper of similar or finer grit as you deem fit.

Finish. You may first fine-finish the repaired area with 360-600 grit silicon carbide sandpaper to save buffing time. If you do, sand just until the glaze is smooth with the surrounding porcelain, gently to avoid sanding through the glaze. Note: for many minor repairs, sanding after the final coat may not be necessary.

Then buff the repair and surrounding area with a soft cloth and a bit of automotive polishing compound.

Post-Operative Care

For routine cleaning of the repaired area, use a mild liquid abrasive or dishwashing liquid; we recommend this not only for the repaired area, but for the entire fixture. Do not use harsh chemicals or abrasive cleaners on the repaired area. This will reduce the chance of scratches from surface dirt or abrasion.

Import Duties and Clearance Fees are the Responsibility of the Buyer. Our Free Shipping Policy does not apply to International Addresses. All International Orders will be accompanied by a Commercial Invoice that states a description of the goods, the sale price, and the country of origin of the goods.

Please choose your shipping service carefully as USPS First Class International may not have Tracking Information available for all countries. No Items will be replaced or No refunds will be issued on International Shipping, so choosing USPS Priority Mail International is definitely your better choice.

By choosing USPS First Class International as your service you agree to our terms and conditions and will not hold us responsible for loss or damage to the package and items in it.

Please contact us at cs@hardtogetitems.com and we would be happy to quote you a shipping rate based on the weight of the items you would like to purchase.